Administrate Post:

Shisha Time

lvl 1: Loincloth
none yet
posted 23 months ago

Vandy Vape Mesh RDA Tank is the greatest sort of squonk RDA (bottom-feeding), build the strength of mesh RDA. The re-buildable platform can be so strong that could fit the mesh wire or standard coil. The best first strong Vandy Vape Mesh RDA in your case. It is appropriate for all the 510 thread Modss in the market. Vandy Vape MESH RDA is 24mm RDA having an innovative design to be appropriate for Mesh wire and standard coil configurations. The invisible clamp style post less deck can rebuild with single coil, dual coils and single mesh wire. By inserting the tails into the slots and locking with side slotted screws. The RDA also features side adjustable airflow and includes 810 Ultem drip tip and Doc tip.


The Vandy Vape Mesh V2 RDA is an new version from the original Mesh RDA with many big improvements. Featuring deep juice wells for easier cotton wick placement, a spring-loaded ceramic wick retainer, spring-loaded clamps for simple of coil installation, and fully adjustable venting through the top in the cap. The top air flow can help if you happen to over drip or higher squonk for the reason that juice can have a harder time leaking out of the cap. The ventilation is also directed down right to the coil hence the flavour will be as you would expect from a mesh coil setup. Another fine feature of the kit could be the addition of the pack of 4 different specially engineered mesh coil strips to help you use them all and discover one you prefer best.


The Vandy Vape Mesh RDA Review: Kit Contents

The Vandy Vape Mesh RDA comes in a fairly easy, cardboard box using a plastic viewing window so users can look at the goods. Vapers can browse the device themselves, although unit itself is entirely unadorned. The kit is chock full of essential vape gear, particularly for a unique rebuildable dripping atomizer like this one.


Build Quality

The Mesh RDA is all-stainless steel, all the way through. There are gold-plated sections, like the 510 connectors, along with the clamps inside the build-deck, but besides that the RDA is solidly built. Its height is 25mm (0.98 inches) from the base to the peak, not including either mouthpiece.


Its diameter is 24mm (0.7 inches), therefore it in concert with many vape mod sizes. The device splits into four main pieces:


The drip Tip

The Top Cap

The main Airflow Adjustment Tube

The Build Platform

There are many color options for this 24mm RDA. Just looking advertising online could be confusing for individuals utilized to typical Velocity, or U-shaped configurations. Since the dripper uses mesh wiring (and not only), there is a slight learning curve regarding how to properly install the leads of mesh coils, not to mention to wicks, cotton you aren't.



Main Features:

Bottom-feeding squonk Pin set up.

Compatible with both Mesh wire & standard coil.

Invisible Clamp Style postless deck.

Ultem drip tip & Doc tip included.



1 x Vandy Vape Mesh RDA Tank

1 x 18.5mm Delrin Doc TIp

1 x Accessory Bag

3 x Kanthal Mesh Wire

3 x Ni80 Mesh Wire

3 x SS316 Mesh Wire


There is a good quantity of accessories within the package, but it sadly only incorporates one friction-fit resin 810 tip. The tip looks nice and I love the green one out of color contrast using the SS, but I wish they might have included an additional tip. It fits well though, and pretty much any 810 tip should assist this RDA. It also includes a 510 tip adapter. There are plenty of spare O-rings, two spare post screws (spares are flathead, and that means you get both options), one spare spring, a good positive pin as well as a squonk pin, a screwdriver as well as an Allen wrench. They also add a metal bar for shaping your mesh coil. There is a bag of two bits of cotton and also the coolest part of it is because possess a pack of 4 mesh coils many different types—although as you will read within the performance section, they perform akin to the other.


Post a Reply